Items 1-9 detail materials included in Kenomee's standard Weather-Tight-Shell package. Various options are available and are typically priced separately when a complete quotation (free of charge) is prepared. Such items may include: Optional Beam Roof, Metal Roofing, Half Logs for Dormers and Gable Ends, Sub-Floor System, Decking and Balcony materials, and Interior Package (interior Partition framing and finishing, Interior finishes for Ceilings, Dormers and Gable Ends, Interior Window and Door Trim, Interior Baseboard, Interior Doors). Various Window and Door options are also available. Other products available include Log Ranch Railing (interior and exterior) and Log Beds. Consult your Kenomee representative for more details.
|
1
PERIMETER WALL SYSTEM
(available in 6, 7 or 8 inch diameter)
|
Northern white cedar, machined Round Logs, Tongue and Groove, with full Saddle Notch Corners |
| 9' Log Walls to accommodate Second Floor/Loft |
| Cedar Dovetail Splines at butt ends |
| Spikes (logs are pre-drilled to accommodate Spikes) |
| Chinking - outside corners only |
| Insulating Log Sealant (at layers and joints) |
| Insulating Log Sealant applicator |
| D-Log Siding for skirting |
| 1" X 2" Starter Strip |
| Window and Door Splines |
| FIELD LABOR ....................... 16 HOURS |
|
2
WINDOWS
by BONNEVILLE
|
Casement style, Solid Pine Frames (Interior & exterior) |
| Double Sealed Insulating Glass |
| Insect Screens on all operating sections |
| Coppertone hardware and screen |
| |
|
DOORS
by BONNEVILLE
|
Pre-hung insulated steel entrance systems |
| Natural Solid Pine frame, magnetic weather stripping and aluminum clad sills |
| Door Locks and Dead Bolts |
| OPTIONS: Various Options for Windows and Doors available. |
|
3
SECOND FLOOR SYSTEM
|
4" x 10" Spruce beams as required |
| Laminated Douglas Fir carrying beam as required |
| 2" x 6" Kiln Dried SPF, "v" Joint, T&G Boards for flooring |
| 2" x 6" Spruce studs for bearing wall |
| 2" x 6" Top and Bottom plate for bearing wall |
| Lag Bolts as required |
|
4
GABLE ENDS
|
2" x 6" Spruce framing and studs |
| 2" x 6" SpruceTop and Bottom blocking |
| Spruce Lintels over openings |
| 1/2" OSB Sheathing |
| Tyvec House Wrap |
| 5/8" x 8" Red Cedar Beveled Siding |
|
5
DORMERS
|
Step Flashing as rquired |
| 2" x 6" Spruce framing and studs |
| 2" x 6" Spruce Top and Bottom blocking |
| Spruce Lintels over openings |
| 1/2" OSB Sheathing |
| 5/8" x 8" Red Cedar Beveled Siding |
|
6
ROOF SYSTEM
|
Spruce Rafters 2" x 10" or |
| Pre-engineered roof Truss system as required |
| Support Ridge Beams or Girders as required |
| 1/2" OSB Roof Sheathing |
| 1/2" H - clips |
| 25 yr standard Asphalt Shingles |
| Roof Vents for Ridge as required |
| 2" x 4" Spruce sub fascia |
| 2-1/2" Starter Strip |
| Hurricane clips |
| Ice/water Shield |
| Tar Paper |
| Round Cedar Posts for Roof Overhangs as required |
|
7
SOFFIT
|
Kiln Dried 1" x 6" "V" Joint, T&G Pine |
| Aluminium soffit vents |
| |
|
8
EXTERIOR TRIM
|
1" x 4" Cedar trim above Windows and Doors |
| Fascia 1" x 8" Pine (2" x 8" Red Cedar Optional) |
| Flashing as required |
|
9
DRAWINGS
|
Complete set of Structural Drawings, Engineered and Stamped to meet National and Local Building Codes. |
| |
| |
|
